LP Series Unitized Punch Units

Toolset Tip
Sometimes there are just too many options available. Let the folks at Toolset help . Call us at 1-800-866-5738 and we will work with you to find the best solution for your needs.

Application Ideas

Every Toolset has it's own niche. New uses are found everyday, if you are not sure of how you might use this specific unit, here are some examples of how others have used them to help get you started.

Plate
Channels
Angles

	Designed to Punch Big Holes on Close Centers Capacity up to 1/8” Mild Steel Holes to 3 1/2”
	1” LP Series Specifications
	.3906 (25/64”) Maximum Hole Size
	1/8” Maximum Metal Thickness (Mild Steel)
	1” Holder Width
	4”, 8” Throat Depth
	5 1/2” Shut Height
	2 19/32” Die Height
		Return to Products
	1 1/4” LP Series Specifications
	.4687 (15/32”) Maximum Hole Size
	1/8” Maximum Metal Thickness (Mild Steel)
	1 1/4” Holder Width
	4”, 8”, 12” Throat Depths
	5 1/2” Shut Height
	2 19/32” Die Height

	1 1/2” LP Series Specifications
	.6250 (5/8”) Maximum Hole Size
	1/8” Maximum Metal Thickness (Mild Steel)
	1 1/2” Holder Width
	6”, 12”, 16” Throat Depths
	5 1/2” Shut Height
	2 19/32” Die Height
		Return to Products
	2 1/4” LP Series Specifications
	1.0000 Maximum Hole Size
	1/8” Maximum Metal Thickness (Mild Steel)
	2 1/4” Holder Width
	6”, 12”, 16” Throat Depths
	5 1/2” Shut Height
	2 19/32” Die Height

	2 3/4” LP Series Specifications
	1.5000 Maximum Hole Size
	1/8” Maximum Metal
	Thickness (Mild Steel)
	2 3/4” Holder Width
	6”, 12”, 16” Throat Depths
	5 1/2” Shut Height
	2 19/32” Die Height
		Return to Products
	3 1/2” LP Series Specifications
	2.1250 Maximum Hole Size
	1/8” Maximum Metal Thickness (Mild Steel)
	3 1/2” Holder Width
	6”, 12”, 16” Throat Depths
	5 1/2” Shut Height
	2 19/32” Die Height

	5 1/2” LP Series Specifications
	3.5000 Maximum Hole Size
	1/8” Maximum Metal Thickness (Mild Steel)
	5 1/2” Holder Width
	9” Throat Depth
	5 1/2” Shut Height
	2 19/32” Die Height

©2000 - 2008 Toolset, Inc. All rights reserved. Duplication of this site, in part, or in whole is strictly prohibited.		Return to Products